12
Loading the batteries in IR Controller
1.
Remove battery cover.
2.
Insert battery ensuring polarity correct.
3.
Replace battery cover.
Start the IR Controller
Press DEV key and input the DVR I.D (default is 88 but can be changed in the
Display Menu and then press ENTER key. Check that the IR Status light is displaying
green.
Stop the IR Controller
When the IR status is on, press the DEV key again to turn off the IR Controller. The
status lamp will now switch off and the IR Controller will not operate the DVR.
Switching the DVR off
When the IR Controller status is on, press the POWER key for several seconds and
the DVR will power off.
Troubleshooting the IR Controller
If the IR Controller does not operate the DVR normally then check the following
items:
1.
check battery connections
2.
check battery charge
3.
check there is nothing covering the DVR IR sensor.
