ALIEN MEGA/MAX USER MANUAL
131
SMTP Port No.:
The SMTP port. The default TCP/IP port used for SMTP is 25.
Enable SSL (optional):
Click the checkbox to enable SSL if required by the
SMTP server.
Sender:
The name of sender.
Sender’s Address:
The
Email address of sender.
Select Receivers:
Select the receiver. Up to 3 receivers can be configured.
Receiver:
The name of the receiver of the Email.
Receiver’s Address:
The Email address of the receiver.
Enable Attached Pictures:
Check the checkbox of
Enable Attached Picture
if
you want to send email with attached alarm images. The interval is the time
between two captures of the alarm images.
Interval:
The interval refers to the time between two actions of sending attached
pictures.
E-mail Test:
Sends a test message to verify that the SMTP server can be reached.
4.
Click the
Apply
button to save the Email settings.
5.
You can click the
Test
button to test whether your Email settings work. The
corresponding messages are displayed.
6.
There are a variety of display messages advising you of possible errors on each
field completed when you fail to send an Email. A final message of “ Email test
succeeded” is displayed that requires a confirmation to proceed. The following is
an example:
Figure 9.2.8.2 Email Testing Attention
9.3
Checking Network Traffic
Purpose:
You can check the network traffic to obtain real-time information about the DVR such
as linking status, MTU, sending/receiving rate, etc.
Steps:
1.
Enter the Network Traffic interface.
Menu > Tools > Net Detect
