C613-50163-01 Rev C
Command Reference for GS970M Series
254
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
P
LUGGABLES
AND
C
ABLING
C
OMMANDS
SHOW
SYSTEM
PLUGGABLE
show system pluggable
Overview
This command displays
brief
pluggable transceiver information showing the
pluggable type, the pluggable serial number, and the pluggable port on the
device. Different types of pluggable transceivers are supported in different models
of device. See your Allied Telesis dealer for more information about the models of
pluggables that your device supports.
Syntax
show system pluggable [<
port-list
>]
Mode
User Exec and Privileged Exec
Example
To display brief information about all installed pluggable transceivers, use the
command:
awplus#
show system pluggable
Output
Figure 8-3:
Example output from
show system pluggable
Parameter
Description
<port-list>
The ports to display information about. The port list can be:
•
a switch port (e.g. port1.0.9)
•
a continuous range of ports separated by a hyphen (e.g.
port1.0.9-1.0.10)
•
a comma-separated list of ports and port ranges (e.g.
port1.0.9,port1.0.10)
awplus#show system pluggable
System Pluggable Information
Port Vendor Device Serial Number Datecode Type
--------------------------------------------------------------------------------
1.0.9 ATI AT-SPSX A03240R111801427 11050801 1000BASE-SX
--------------------------------------------------------------------------------
Table 9:
Parameters in the output from the
show system pluggable
command
Parameter
Description
Port
Specifies the port number for the installed pluggable
transceiver.
Vendor
Specifies the vendor’s name for the installed pluggable
transceiver.
Device
Specifies the device name for the installed pluggable
transceiver.
