TdC 8000 for Equestrian
Page 73
Version: E-01-08-08
Page 73
1
Standard Stage
Finish
Obstacle
2
3
5
4
6
Start
1
Finish
Obstacle
2
3
4
Stage 2
Start
6.1.11.
American Stage F:
Program 122
Program for American stage. All competitors ride the first stage. The first stage is a standard stage.
Whoever passes the first stage without penalty points will be allowed for the second stage. If a rider
has penalty points in the first stage he will not be allowed for the second stage. The second stage is
as well a standard stage. Between stage 1 and stage 2 is a countdown of 30 seconds.
Standard penalty points per started second time violence:
Stage 1:
¼ penalty point per started second time violence
Stage 2:
1 penalty point per started second time violence
Adjustment:
-
Switch TdC 8000 on (switch 26)
-
Select program 11 "Show Jumping" with cursor key (¢ and £)
-
Press <ENTER>
-
Select program 122 "American Stage F" with cursor key (¢ and £)
-
Press <ENTER>
-
Select race that you want to use and clear memory (e.g. <F1> for race 1)
-
Press <ENTER>
-
Select race (e.g. <F1> for race 1)
-
Press <ENTER>
-
Select the precision with key <F1> to <F4>. Standard is <F3> with 1/100 seconds
-
Press <ENTER>
-
Select the timing mode (we recommend <F2> for Difference Timing")
-
Press <ENTER>
-
Synchronize the TdC 8000 (with time of day and other timing devices)
-
press <F1> if the finish display (7) shows the correct time of day
-
wait until TdC 8000 gives at the next full minute the synchronize signal to external devices
(you are now ready for timing)
-
press <F2> if the finish display (7) shows the wrong time of day
-
input the time of day, confirm it with <ENTER> and make a start signal (channel 0 or
press <START>
-
Press <ALT> and <MENU> together.
-
Adjust menu 36, 37, 38, 39, 40, 41, 42, 43, 44, and 45 as required by the circumstances of
your event (see next page).
-
Exit the menu when you did all adjustments with <NO>.
Race operation:
-
Input the start number for the start with start keyboard (9) (#1)
-
Press <ENTER>
-
Display (2) must show the correct start number
-
Display (7) must show the correct countdown time (e.g. 60 seconds)
