TdC 8000 for Equestrian
Page 52
Version:E-00-08-08
Page 52
Start
Finish
Obstacles
1
2
3
4
5
6
7
1
Start
Obstacles
2
3
4
5
Finish
Stanadrd Competition
Jump Off
¼ penalty point per started second time violation
1penalty point per started second time violation
6.1.2.
Standard Show Jumping Table A2:
Program 112
Show Jumping Table A2:
Stage:
ranking by points and time
no jump off
To operate this program see page 42, 6.1.1. Standard Show Jumping A1
6.1.3.
Standard Show Jumping Table AM3:
Program 113
Show Jumping Table AM3:
Stage:
ranking by points
Jump off: r anking by points and time
To operate this program see page 42, 6.1.1. Standard Show Jumping A1
Make a classement before you change to the jump off. All competitors that are not allowed for the
jump off will not be in the classement of the jump off.
Changing to the Jump Off:
In order to change form the standard competition to the jump off you must use Menu 24 ”CHANGE
PARCOUR”. You can get into the menu by pressing <MENU> and <ALT> simultaneous. Now use
the cursor keys to change to Menu 24 and press <YES>. In the jump off you can use any start
number again. Normally only riders with no penalty points in the standard competition are qualified
for the jump off.
-
The info display (6) shows the following:
Select parcour: PARCOUR 1 F1
back to standard competition
JUMP OFF 1< F2
Continue with jump off
Continue: ENTER
-
Select Jump Off with key <F2> and confirm with <ENTER>
-
Adjust the following menus (see page 44): Menu 37 (time violation 1), Menu 39 (Parcour
Time
1), Menu 41 (Block Time 1), and Menu 43 (Count Down Time 1).
For the jump off you have a new parcour time. Mostly you have as well a new time violation (1
point per started second time violation). Important is as well, that you adapt the block time to
the new parcour time, if you use the block time.
-
Leaf the menu with <NO> after you made all changes.
-
Continue to work as in the standard competition.
