TdC 8000 for Equestrian
Page 26
Version:E-00-08-08
Page 26
-
You can also over write the valid time (first line) with the numbers of the start keyboard (9)
(manual input of the start time).
-
You can assign the selected time to another start number by pressing <F1> and input the
new start number.
-
Exit the input menu by pressing <INPUT> of the start keyboard (9) again.
Attention:
-
If it shows 00:00:00.000 as start time it means, that you have no start time yet.
-
If you make another start time valid, it marks the old start time with a c (clear).
e.g.: c 0009 ST 12:13.21.115
Group start:
If you work with group start, you can change the start time like for the single
start. In the input menu it shows instead of the start number the group number. You can change
only the start time of the complete group, but not from a single competitor.
4.3.2.
Editing of Finish Times
4.3.2.1. Clear Finish Times
-
<CLEAR> of the finish keyboard (15) clears the finish time of the start number shown in
display (8).
-
The run time gets replaced by the running time in the finish display (7).
-
The cleared time is now marked with a c (c= cleared).
-
The printer prints the time with a c prefix.
-
The output of RS 232 interface looks like: c0043 C1 10:35:33.854
4.3.1.2. Restoring a Cleared Finish Time
-
The correct start number must be shown in the finish display (8). Then, press <ALT> and
<CLEAR> on the finish keyboard (15) together, it makes a valid time out of the cleared time.
-
The finish display (7) resumes the running time.
-
It stores the time as valid finish time.
-
The printer prints a valid finish time.
-
The RS 232 interface sends the valid finish time.
-
You can only restore the last finish that was cleared.
Especially useful if a time is accidentally cleared.
4.3.2.3. Changing Finish Times
Use this function to edit finish times. If you press the <INPUT> of the finish keyboard (15) it is can
edit the finish time of the start number shown on the finish display (8).
-
over write a finish time with keyboard (15)
-
copy the finish time of a start number to another start number (if you fail to identify the
racer correctly when he cross the line).
-
identify the correct finish time from many recorded impulses.
-
Disqualification of a competitor (start number)
Input functions:
-
Press <INPUT> of the finish keyboard (15)
-
The info-display (6) shows the valid finish time of the start number you wish to edit.
Input: 0015 C1 13:15:35.486 NEW No F1
e.g. start number 15,
DISQU. F2
the last digit of the
start numberblinks,
you can over write the
startnumber or change
it with the cursor keys
(
o
and
p
)
