ALGE-Timing OPTIc3, Руководство пользователя

Страница: 27 / 121

Manual
Photo Finish OPTIc3
-27-
6.3.1 Zero Control for Track and Field (Start Control)
You can record the flame of the start gun fired on the start line (or flash of the e-Start). With
this test, the referee can check the synchronization between time and picture recording. This
mode also records the start sequence.
•
Load the prepared “Heat” in the “Timing” container by double click in the meet browser.
•
Click on the button <Activate test start on C1>
•
Now the next start will be recorded
•
Click on <Timing> and select the precision on 1/1000
th
or 1/10000th
•
Prepare the start gun or e-Start as for a normal race at the finish line
•
Lay the start gun or e-Start on the finish line and put something dark (e.g. black paper)
under the start gun or e-Start (where the smoke comes out of the barrel or the e-Start
flashes to get a better contrast)
•
Fire start gun or e-Start
•
The start shot or flash is automatically recorded and shown in the picture on the screen.
At the start of the flame in the picture the
time must show 0.000. If you move the time cursor inside the flame you
must see that the time increases (e.g. 0.001
Changing between black and white and colored picture with
6.3.2 Evaluation for Track and Field
If you select track and field the group func-
tion is not available. If you receive results
with BIB-evaluation
, it is possible to input
the bib or the lane number.
This function is helpful for long-distance
races and if the athletes have the track
number on their sides. In most cases the bib
number is not readable, but the track num-
ber on the side is.