english
INsERtING tHE BAttERIEs
Insert two AA batteries with the + and – as shown
(Fig. 11)
wARNING!
Do not short circuit the battery poles and the spring
connectors, which can cause overheating. To avoid
overheating, use only the switch to stop the motor
or other moving parts. Do not attach the wires to a
power point (wall socket).
wARNING!
This toy contains small balls and sharp points at
the end of the parts. If the child’s head gets too
close, hair may get caught in the toy’s motor. The
styrofoam balls may roll away and pose a choking
risk. This toy must be played with carefully and only
under adult supervision.
If you must discard this toy in the future, you should
be aware that electrical waste must not be discarded
with ordinary household waste. Take the product to
a recycling centre. Contact your local council or the
retailer for advice about recycling (European Electric
and Electronic Waste Directive).
© 2007 EASTCOLIGHT SCIENCE (H.K.) LTD.
ALL RIGHTS RESERVED
10.
Insert the batteries (see “Inserting the batteries”
below) and push the switch to the back position to
start your Robotic Ball Collector. Lay out the balls
included in front of the robot and watch how they are
collected by the arms!
