english
1.
1 Front left arm
2.
1 Front right arm
3.
1 Bumper
4.
1 Chassis
5.
2 Plastic rings
6.
1 Straight arm
7.
1 Angled right arm
8.
1 Gearbox
9.
1 Motor
10.
1 Battery compartment
11.
3 Spring connectors
12.
1 Switch
13.
3 Balls
Fig. 4
Fig. 6
Fig. 7
Fig. 5
3.
As shown in Fig. 4, attach the front right and front
left arms (1, 2) to the bumper (3) and the angled
right arm (7). Make sure the little pin at the end of
the arms is inserted under the angled right arm (see
position 1) and that both arms are securely attached
to the holder on the bumper (see position 2).
1
1
1
2
2
2
4.
Insert the motor (9) into the gearbox (8) until
it clicks into the right position (Fig. 5).
5.
Attach the assembled gearbox to the chassis as
shown. Careful! It must click firmly into place. (Fig. 6)
6.
Connect the straight arm (6) between the angled
right arm (7) and the gearbox cover. First insert the
straight arm onto the knob on the angled right arm
(Fig. 7, position 1). You must move the straight arm
to the other side before it will attach securely. Then
insert it into the gearbox cover (Fig. 7, position 2).
