ALFAtron ALF-MUH88E, Руководство пользователя

Страница: 14 / 44

ALFATRON ALF-MUH88E
9
4. System Operations
4.1 IR Control
IR Remote
Connect an IR receiver to the IR EYE port of the Matrix Switcher, users can control it
through the included IR remote. Here is a brief introduction to the IR remote.
①
Standby button:
Press it to enter/ exit standby mode.
②
INPUTS:
Input channel selection buttons, range from 1~8.
③
OUTPUTS:
Output channel selection buttons, range from 1~8.
④
Menu buttons:
 ALL : Select all outputs.
 EDID management button: Enable input port
to manually capture and learn the EDID data
of output devices.
 CLEAR: Withdraw an operation like switching
output channel, learning EDID data before it
comes into effect. Meanwhile, the matrix will
return to the previous status.
 ENTER: Confirm operation.
1. To convert one input to an output:
Example: Input 1 to Output 3
→ Press INPUTS 1 + OUTPUTS 3
NOTE:
Default status, on first boot up this matrix assigns the IR outputs to the
corresponding HDMI input, meaning, IR out 1 is directly associated to HDMI
input 1 and so on. When you switch an HDMI input to a different output, the
corresponding IR OUT will be switched synchronously to allow the IR
commands to be sent from the select zone back through the Matrix
INPUTS
OUTPUTS
MENU
1 2 3
4 5 6
7 8
1 2 3
4 5 6
7 8
ALL EDID
CLEAR ENTER
1
2
3
4