ALF-MMX1616-N
14
4. Button Control
The ALF-MMX1616-N matrix can be controlled via the front panel buttons. To switch the
AV signal, please operate the buttons under the following sequence:
Sequence: “
Input Channel
” + “
AV
” +“
Output Channel
” + “
Enter
”
Note:
“Input Channel”: Fill with the number of input channel to be controlled.
“Output Channel”: Fill with the number of output channels to be controlled. Press
“All” to select all the outputs.
Use “,” button to separate multiple I/O channels, and press “ENTER” button to
confirm the operation.
The input / output channels on the rear panel are counted from left to right, top to
bottom.
The input delay time between two numbers of every input and output channel must
be less than 5 seconds, or the operation will be canceled.
Example:
To switch input 1 to output 1, press input “1”, output “1”, and “ENTER”
To switch signals from input 1 to all output channels, press “1”, “All” and “ENTER”
Other Functional Buttons:
Button
Description
Operation
UNDO
Return to the previous
status.
Status 1: Input 6 -> output 6
Press input “6” + “AV”+ output 4 to
change the connection. Press “Undo” to
return to Status 1.
Backspace the last
operation.
If you press buttons “1”, “AV”, “2”, “
”
in order, then “2” will be canceled.
THROUGH
Get straight I/O connection,
e.g. input 1 to output 1,
input 2 to output 2.
Format: “Input Channel” + ”Through”
If you press buttons “ALL”,
“THROUGH” in order, then the result
will be input 1
output 1, input 2
output 2, input 3
output 3 … input 16
output 16.
