Alfa Romeo MiTo 2015, Руководство пользователя

Страница: 29 / 280

Rain sensor (Rain sensor sensitivity
adjustment)
(for versions/markets, where provided)
This function allows you to adjust the rain sensor sensitivity to 4 levels.
To set the required sensitivity level proceed as follows:
❒
briefly press the SET/ button, the previously set sensitivity level
will flash on the display;
❒
press the "+" or "−" button to adjust;
❒
briefly press the SET/ button to go back to the menu screen or
hold the button down to go back to the standard screen without
saving.
Activation/Trip B data (Trip B
enablement)
This function may be used to activate (On) or deactivate (Off) the Trip B
(partial trip). For further information see “Trip computer”.
Proceed as follows to switch the function on and off:
❒
press the SET/ button briefly to make the display flash "On" or
"Off" according to what was previously set;
❒
press the "+" or "−" button to select;
❒
briefly press the SET/ button to go back to the menu screen or
hold the button down to go back to the standard screen without
saving.
Time adjustment (Clock adjustment)
This function enables to set the clock through two submenus: "Time"
and "Format".
To carry out the adjustment, proceed as follows:
❒
briefly press the SET/ button and two submenus ("Time" and
"Format") will be displayed;
❒
press the "+" or "–" button to move between the two submenus;
❒
once you have selected a sub-menu to be modified, press SET/
briefly;
❒
when the “Time” submenu is entered, by briefly pressing SET/
the hours flash on the display;
❒
press the "+" or "−" button to adjust;
❒
briefly press the SET/ button, which makes the display flash the
"minutes";
❒
press the "+" or "−" button to adjust.
IMPORTANT Each press on the "+" or "−" buttons causes an increase
or decrease of one unit. Hold down the button to increase/decrease
the setting rapidly and automatically. Complete the adjustment with
single presses of the button when you approach the desired value.
❒
When you select "Format": briefly pressing the SET/ button
makes the display mode flash on the display;
❒
press "+" or "–" to select “24h” or “12h”.
When you have made the required settings, briefly press the SET/
button to go back to the submenu screen or hold the button down
to go back to the main menu screen without saving the new settings.
Hold the SET/
button down again to return to the standard screen
or to the main menu according to where you are in the menu.
25
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX