Alfa Romeo 8C Spider, Руководство пользователя

Страница: 17 / 235

15
1
VEHICLE IDENTIFICATION DATA
OPERATION
Each time the ignition key is removed from
position
STOP
the protection system activates
the engine immobilizer.
Upon starting the engine, when the key is turned
to
MAR :
1) If the code is recognised, the CODE
warning light on the instrument panel turns
off in one second, while the EOBD
warning light turns off after about four
seconds, after the ECU has completed its
diagnostic cycle. The protection system has
recognised the key code and deactivates the
engine immobilizer. Press the
START button
and at the same time depress the brake
pedal to start the engine.
2) If the CODE warning light remains on
and the EOBD warning light goes off
after four seconds (ECU diagnostics) and
illuminates again immediately afterwards,
the code has not been recognised and the
message “Electronic key not recognised”
is displayed. In this case, it is advisable to
turn the key back to position
STOP and
then back to MAR ; if the immobilizer stays
on, try with the other keys.
If you are still unable to restart the engine,
you will have to run an emergency start
procedure and contact an
Authorised
Service Centre of the Manufacturer’s
Network
.
While driving, with the ignition key in position
MAR :
1) If the CODE warning light illuminates,
it means that the system is performing a
self-diagnostic cycle. At the fi rst stop you
can test the system: stop the engine by
turning the ignition key to position
STOP
and then turn the key back to position.
MAR
: the CODE warning light will
illuminate and should turn off in one
second. If the warning light remains on,
repeat the procedure described previously
leaving the key at
STOP
for more than 30
seconds. If the problem persists, please
contact an
Authorised Service Centre of
the Manufacturer’s Network
.
2) If the CODE warning light fl ashes, it
means that the vehicle is not protected by
the immobilizer device. Immediately contact
an
Authorised Service Centre of the
Manufacturer’s Network to have all the
keys stored in the system memory.
WARNING
: Strong impacts can damage the
electronic components in the key.
WARNING : Each key supplied has its own
specifi c code, which must be stored in the
memory of the system control unit.
Alfawiki.nl