Alfa Romeo 8C Spider, Руководство пользователя

Страница: 118 / 235

116
4
Air distribution controls C
and G
They can operate in two modes:
Automatic (AUTO)
the air flow distribution is controlled by the
electronic system depending on the climate
conditions and the selected temperature
.
Manual
This is used to direct the air flow in the six
positions of the respective areas (driver-
passenger)
.
Temperature selection
controls A and I
This is used to set the temperature desired
inside the passenger compartment.
The end positions activate the functions
“
LO ” and “ HI ” (minimum and maximum air
temperature).
Activation
Fully automatic operation: turn the controls
C
,
E
and
G
to AUTO.
Deactivation
Deactivate the compressor by pressing the button
B and set the control to OFF E (fan speed).
Air conditioning control
switch B
Released
the air conditioner is on. The air is cooled and/
or only dehumidified according to the selected
temperature.
Pressed (LED on)
The air conditioner is off.
However, heating is still enabled and will turn
on according to the temperature set.
Fan speed control E
It can operate in three modes:
Automatic (AUTO)
The air flow is controlled by the electronic
system according to the selected temperature to
be reached and maintained
.
Manual “OFF”
Turn the control to this position to turn off the air
conditioning and to only allow air inlet from the
outside when the vehicle is in motion.
Fan speed
The four setting positions allow the occupants to
select the air flow rate.
Alfawiki.nl