45
The walking foot accessory
* The walking foot accessory is optional. It is not included with this
machine.
Alwaystrytosewfirstwithoutthewalkingfootaccessorywhichshould beused
onlywhen necessary.
It is easier to guide the fabric and you have a better view of the seam
when using the standard, regular foot on your machine. Your sewing
machine offers excellent stitch quality on a wide range of fabrics from
delicate chiffons to multiple layers of denim.
The “Walking foot“ accessory equalizes the feeding of the upper and
lower layers of fabric and improves the matching of plaids, stripes and
patterns. This foot helps to prevent uneven feeding of very difficult
fabrics.
1. Lift the presser foot bar.
2. Remove the “foot holder“ by opening counter clockwise the presser
bar attaching screw. (3)
3. Attach the “walking foot“ to the machine in the following way.
i) The fork arm should fit into the needle screw and clamp.(2)
ii) Slide the plastic ‘attaching head‘ from your left to right so that it is
fitted into the “presser foot bar“.
iii) Lower the “presser foot bar“.
iv) Replace and tighten clockwise the “presser bar attaching screw“.
4. Make sure both the “needle screw“ and the “presser bar attaching
screw“ are tightly secured.
5. Draw the bobbin thread up and place both the bobbin thread and the
needle thread behind the walking foot attachment.
3
Fork arm
Needle
Needle
screw & clamp
Needle bar
Attaching head
Fork arm
Presser bar attaching screw
Presser foot bar
Содержание orion Series
Страница 1: ...Series...
