Alfa Laval Toftejorg SaniMicro, Инструкция по эксплуатации

Страница: 6 / 32

3 Introduction
3.1 Introduction
This manual has been prepared as a guide for installation and for the persons who will be operating and maintaining your
tank cleaning machine.
Should you require further assistance, our Technical Sales Support department and worldwide net of sales offices will be pleased
to help you. Please quote the type, article and serial numbers with all of your enquiries; this helps us to help you. The type
and serial number are placed on the body of the tank cleaning machine. For more information on marking see section 3.4
Marking and 3.5 ATEX/IECEx marking.
Warning: Before installing the machine and setting it into operation carefully read the General safety and installation
instructions (page 12) and the specific conditions for safe use in accordance with ATEX/IECEx directive
2014/34/EU (page 13) and take all necessary precautions according to your application and local
regulations.
NOTE
The illustrations and specifications contained in this manual were effective at the date of printing. However, as continuous
improvements are our policy, we reserve the right to alter or modify any unit specification on any product without prior notice or
any obligation.
The English version of the instruction manual is the original manual. We make reservations in regard to possible mistranslations in
language versions of the instruction manual. In case of doubt, the English version of the instruction manual applies.
3.2 Intended use
It is to be verified by the end-user:
- that the tank cleaning machine is in conformity with respect to tank, vessel or container size in which it will be used.
- that the construction materials (both metallic and non-metallic) are compatibility with product, flushing media, cleaning
media, temperatures and pressure under the intended use.
The tank cleaning machine is intended for use in closed tank, vessel or container. If used in open environment see 4.3 General
safety and installation instructions (page 12).
Steam cleaning
If stream cleaning is done through the machine, the steam pressure must not cause the machine to rotate.
See paragraph 4.4 Specific conditions for safe use in accordance with ATEX/IECEx certification (page 13).
For information on recommended installation position see page 12.
6