5 Maintenance
Study the instructions carefully.
The items refer to the parts list and service kits section.
5.10
Changing pneumatic movement on fuly maintainable actuator (NC/NO)
If the actuator is marked with a danger warning, do NOT attempt to cut the actuator open.
See also section .
DO NOT DISASSEMBLE
kg
!
SPRING UNDER LOAD
Do not attempt to cut open
kg
!
Do NOT attempt to disassemble the actuator due to spring
under load danger!
Do NOT attempt to cut the actuator open due to spring
under load danger!
Before dismantling check that the actuator not is marked with a warning.
1. Rotate cylinder.
2. Remove lock wire and pull away cylinder.
3. Reverse piston and spring assembly.
4. Reverse adapter, air fitting and plug to opposite end.
5. Reassemble in reverse order (3 to 1).
2206-0008
Pneumatic movement
upwards
Pneumatic movement
downwards
38
