3.2 Unloading unit from standard truck
Before starting lifting, make sure that
The ground under the unit has enough bearing capacity.
The device is correctly erected and horizontally installed.
The support legs are in supporting position.
The lifting capacity of the device is sufficient.
The operators know how to use the lifting device according to the operation and safety
instructions.
No electric or other cables are near the lifting place.
The working area of the lifting device is sufficient and safe.
There are no obstacles or risks on the working area.
Caution:
Check that the unit is tied tightly to prevent it from moving during transport. Ensure that the
binding does not damage the unit.
3.2 Unloading unit from standard truck
Note:
Notice the weight of the unit to ensure safe lifting.
3.2.1 Unloading horizontal units from container
See lifting instructions in the full Solar S/SR instruction manual.
3.2.2 Unloading vertical units from container (Container on ground level)
1.
Use a chain with hooks to pull out the unit. Attach the hooks on both pull out plates mounted on the
wooden pallet.
2.
Use wooden balks under the unit to prevent fall impacts.
©
Alfa Laval, Rev-03
6
Alfa Laval is a trademark registered and owned by Alfa Laval Corporate AB.
Alfa Laval reserves the right to change this specification without prior notification.
