Alfa Laval DuraCirc Range, Инструкция по эксплуатации

Страница: 7 / 69

2 General information
2.1 General information
The DuraCirc pump supplied is a positive displacement circumferential piston pump, which may be
supplied with or without a drive unit. The drawing shown indicates main components of the pump unit.
The DuraCirc range has a universal gearbox design which enables the flexibility of mounting pumps
with the inlet and outlet ports in either a vertical or horizontal plane. The port orientation, vertical or
horizontal, may be changed by moving one of two available bolt-on feet on the gearbox. Port
orientation should be specified when ordering, but the alternative foot design allows pumps that are
already installed being changed should the need arise.
Drawing shows only mounted unit
3206-0001
D
C
G
B
A
F
E
H
A Rotorcase cover
B Rotorcase
C Ports
D Gearbox
E Drive unit
F Coupling guard (encloses coupling)
G Product seal area (inside rotorcase)
H Baseplate fixing holes
Pump duty conditions
The pump should only be used for the duty for which it has been specified. The operating pressure,
speed and temperature limits have been selected at the time of order and MUST NOT be exceeded.
These details are stated on the original order documentation and if not available may be obtained
from your supplier quoting pump model and serial number.
200002348-1-EN-GB 7
EN