- 26 -
ALFA IN a.s. ©
www.alfain.eu
SELECTING PROGRAM
•
press button X3 for 3 s
•
LED X16
will illuminate. On left display X8 No of the last program
will appear.
•
Selects the desired program (see the table below) by means of Encoder
X20 and confirm by pressing button X3. (If within 10 s is not selected
program and confirmed by button X3 LED X16 would turn off and program
has not been selected).
Fig. 15 – Table of programs ALF320, ALF400
Fig. 16 – Table of programs ALF280
8.5 SYSTEM OF ADVICES ON DISPLAY X12 (JUST SYNERGY)
•
First left figure – coarse voltage A - B (JUST ALF 400).
•
Second left figure - fine voltage 1 - 9, the tenth position of the switch is
signed as „0“; ALF 320 shows numbers 1-12.
•
Third left figure – choke position.
