- 23 -
ALFA IN a.s. ©
www.alfain.eu
TWO STROKE DIGITAL
Press the button X3
(2T/4T) and select the LED X4
. Welding
procedure starts by pressing the button in the torch handle. It is necessary to
keep the button pressed all the time during welding. The welding stops by
releasing the torch button.
TWO STROKE BASIC
Potentiometers V6 and V7 must be in 0 position.
FOUR STROKE DIGITAL
Press the button X3
(2T/4T ) and select the LED X18
. The four
stroke mode is being used mostly for long welds, when there is no need to
hold the torch button pressed. The welding procedure start by pressing the
torch button; after releasing the torch button the welding continues. The
welding stops after the second pressing and releasing the torch button then.
FOUR STROKE BASIC
Set the potentiometers V7 into any position 1 – 10. Potentiometer V6 must
be in 0 position.
SPOT AND INTERVAL WELDING DIGITAL
Keep pressing the button X3
(2T/4T) for at least 3s
