Alexander History Lesson VOL.3, Руководство пользователя

Страница: 9 / 12

7
e
xPression
P
edAl
History Lesson v3 supports most types of expression pedals for performance control.
We recommend the Roland EV-5 and Moog EP-3, but just about any expression pedal that
uses a TRS cable should work. The supported expression wiring is SLEEVE = 0V, RING = 3.3V,
TIP = 0-3.3V.
Before connecting your expression pedal, make sure that you have set up the MultiJack to
read expression! The instructions are covered in the Setting Up Your Pedal section on page
6.
SET HEEL DOWN
POSITIONS
SET TOE DOWN
POSITIONS
Connect your expression pedal to the MultiJack with a TRS cable. Engage the pedal and
sweep the pedal - you should see the upper LED change colors and the sound should change.
Set the expression pedal to its
HEEL DOWN position.
Turn the pedal knobs to set the
sound you want for the HEEL
DOWN position.
Next, set the expression pedal to
its TOE DOWN position.
Move the knobs to the desired
settings for TOE DOWN.
That’s it!
All of the knobs on the pedal can be controlled with the expression pedal except the mode
selection.
Once you have set the sounds you like, don’t forget to save your preset! Changes you make to
a preset are lost if you power off the pedal or load another preset without saving!