10
midi C
ommAnds
All of the functions of your Neo Series pedal may be controlled with MIDI messages.
The following commands are accepted by History Lesson v3:
MIDI Program Change: Load Presets 0-15
0-3 are the Red bank, also accessible by holding the Bypass / Preset footswitch
4-7 are the Green bank
8-11 are the Blue bank
12-15 are the White bank
MIDI Continuous Controller 97: Ramp
Send any value to trigger the ramp
MIDI Continuous Controller 100: Expression Pedal
Value 0 = Heel down, Value 127 = Toe down
MIDI Continuous Controller 102: Bypass
Value 0-63 = Bypass, Value 64-127 = Engage
MIDI Continuous Controller 50-57: Pedal Knobs
Value 0 = CCW, Value 127 = CW
CC 50 = Mod
CC 54 = Mod Rate
CC 51 = Time
CC 55 = Tone
CC 52 = Repeat
CC 53 = Mix
CC 57 = Level
MIDI Continuous Controller 59: Mode Select
0: MAG
3: LOFI
1: BBD
4: 4HD
2: DIG
5: FLT
MIDI Beat Clock: History Lesson v3 will sync to MIDI Beat Clock over USB or MultiJack.
s
PeCiFiCAtions
Input Impedance:
1M ohm
Output Impedance: 560 ohm
Power Supply:
9V DC, 80mA or greater, center negative
Bypass:
Buffered analog bypass
Dry Signal
Analog
DSP:
24-bit + 32-bit controller
Sampling Frequency: 32kHz wet, analog dry
We recommend the use of an isolated power supply with your Neo Series pedal.
Содержание History Lesson VOL.3
Страница 1: ...History Lesson VOL 3 USER MANUAL ...
