Alesis DM Pro Kit, Руководство по обслуживанию

Страница: 8 / 44

DM PRO (D6) Trigger Test Procedure (2)
Software: V2.00 Trigger V2.00
DD: 12/28/99
REV: D
I) UPLOAD D6 USER & TRIGGER PROGRAM :
A)
Press the “
CURSOR
” button while powering up the D6 unit.
B)
Press the “ STORE ” button.
- Press “
CURSER
” button until you see “
Load USER from Factor
y
? (STR)
”
- Press “
STORE
” again to LOAD USER PROGRAM.
- Press“
CURSER
” button until you see “
Load TRIGS from Factory? (STR)
”
- Press “
STORE
” again to LOAD TRIGGER PROGRAM.
C)
Press “ MIDI ” button and adjust the VALUE ENCODER until display reads
“
AuxPed Ctl#: 016
”.
Press CURSER
¾
1-time and adjust the VALUE ENCODER until display reads
“ AuxPed Ctl#: KIT+”.
D
) Press “
KIT
” button.
Adjust “ VALUE ” ENCODER until “ KIT ” button starts to flash.
Adjust “
VALUE
”
ENCODER
until display reads “
00 “ProRockKit
”.
Press “
KIT
” Button to load drumkit.
E)
Plug
FOOT SWITCH
into the
AUX PEDAL
plug. Press
KIT
button. Press the
FOOT SWITCH
, and the display should load the next kit.
* FAIL UNIT IF DIFFERENT *
E
) TURN POWER OFF………
II. TRIGGER TEST:
Equipment:
1. 1 pcs of ¼” Mono audio CABLE & Special make Y CABLE.
2. 1 pcs of headphone.
3. 1 D6 Unit.
4.
1 Trigger fixture (YAMAHA DRUM PAD)
1 Trigger pad w/clamp
5.
1 Drum stick
6.
1 foot switch
NOTED: PLEASE MAKE SURE D6 UNIT HAS BEEN UPLOAD WITH USER
PROGRAM BEFORE THIS TIRGGER TEST PROCEDURE.
1