Alesis DM Pro Kit, Руководство по обслуживанию

Страница: 10 / 44

12) Hit the drum pad and then grab the end of it immediately after hitting it.
-You will hear a DRUM effect stop as soon as you grab the pad. If not, Fail unit.
-LCD will pop up a circle surround “
8
” for about half a second when trigger
fixture was hit. * FAIL UNIT IF DIFFERENT *
13)
If TRIGGER 1-14 PASS THE TEST.
-STEP on the foot switch PEDAL by your foot and then release.
-You will hear that DRUM effect at HEADPHONE. If not , fail unit.
-LCD display will pop UP a circle surround “
15
” for about half a second,
-And as you foot release the PEDEL, LCD display will pop UP a circle surround
“
16 ” for about half a second.
*Fail UNIT if different .
x
IF PASSED , THEN GOTO AUX IN (RCA) & NOISE SUPPRESSION
TEST.
III. NOISE SUPPRESION TEST:
Equipment:
1 pcs of ¼” SPLIT (Y) AUDIO CABLE
SETUP:
A) Disconnect the ¼” mono audio cable which connect to drum pad & D6.
B) Connect the SPLIT (Y) CABLE as follow:
1) The end with two ¼” plugs are connect to D6, one to “TRIGGER 1”, & the
other to “NOISE SUPPERESSION” JACK.
2) The end with one ¼” plug is connect to DRUM PAD.
START: (make sure “TRIG” button is still ON & HP POT is CW all the way up)
14) Turn “
VALUE
” encoder clockwise (
CW
) until you see “
NosieSup
” display on
LCD DISPLAY .
15) Push “
CURSOR
” RIGHT button once.
16) Turn “ VALUE ” encoder counter clockwise ( CCW ), or until you see “ OFF ” on
LCD DISPLAY .
17) Hit the drum pad a few times, you will hear a normal drum beat & volume on HP.
18) Turn “
VALUE ” encoder clockwise ( CW ), or until you see “ 00 ” on
LCD DISPLAY .
19) Hit the drum pad a few times, you will hear skipping drum beat & slightly lower
volume on HP now. IF NOT, FAIL UNIT .
CONT…FOR AUX IN TEST
3