4
5
OVErrIdE THE SYSTEm TO TUrN OFF ANTI CAr- JACKINg:
Turn the ignition switch from OFF to
ON, and within 0 seconds push valet switch, the siren will stop and the system disarmed
Note:
If you use password pin code to double protect the vehicle security, you will need to use it
to completely disarm the system.
P. SYStem’S tRIGGeR CHeCK
(For two-way transceiver operation only)
Press the transceiver
F
button first, within seconds press
(C)
button.
It responds with one melody sound and all trigger’s records will immedi-
ately displayed on the LCD screen.
Note:
If it has no responds then you are out of range.
Q. SYStem’S StAtUS CHeCK
(For two-way transceiver operation only)
When you want to check the system’s present status through the LCD
screen, Press the transceiver
F
button twice, within seconds press
(C)
button. It responds with one melody sound, the LCD screen should be
illuminated.
R. DRIVeR PAGING
(For two-way transceiver operation only)
It is useful the event that someone wants to page the driver of the parked
vehicle. Under the ignition switch “off” condition, press and hold the valet
switch for seconds to page the driver, one chirp sound shall be emitted
from the vehicle and the paging melody sound continues you Remote LCD
transceiver and “
” indication flashes on the LCD screen.
S. Dome LIGHt CoNVeNIeNCe DeLAY & SUPeRVISIoN
Upon disarming, the interior lights will remain on for 0 seconds. Note: Turn ON the ignition
switch or arm the alarm will turn off the dome light.
t. IGNItIoN CoNtRoL PoWeR DooR LoCK/UNLoCK
If the vehicles door locks have been interfaced to the system, the system will automatically lock
the vehicle’s doors when the ignition is turned “ON” and/or unlock the vehicle’s doors when the
ignition is turned “OFF”.
U. tRUNK ReLeASe (CHANNeL 3) oUtPUt
Press and hold the
button on transmitter for two seconds to remote
control the trunk release or other electric devices.
V. CHANNeL 4 tImeR CoNtRoL oUtPUt
Press the transmitter (4) and the (4) buttons at the same time to ac-
tive Channel 4 function. Channel 4 is user-programmable timer output. You
may program the built-in timer to send a ground signal for any time interval
between second and minutes. For instance, this timer output may be
used to turn on the headlight, power window or sunroof. (Factory defaults
setting at momentary output.)
W. CHANNeL 5 tImeR CoNtRoL oUtPUt
Press the transmitter (5) and (5) buttons at the same time to active
Channel 5 function. Channel 5 is user-programmable timer output. You may
program the built-in timer to send a ground signal for any time duration
from second to 0 seconds. For instance, this timer output may be used to
turn on the headlight, power window or sunroof. (Factory defaults setting at
momentary output.)
X. CHANNeL 6 tImeR CoNtRoL oUtPUt
Press the transmitter
✱
(6) and
(6) buttons at the same time to active
Channel 6 function. Channel 6 is user-programmable timer output. You may
program the built-in timer to send a ground signal for any time duration
from second to 0 seconds. For instance, this timer output may be used to
turn on the headlight, power window or sunroof. (Factory defaults setting at
momentary output.)
Y. Power on memory
This security system is equipped with circuitry that will allow the unit to remember its alarm state
if the power is lost and then reconnected.
