ARm Armed mode
Your vehicle is in armed mode
Valet mode
All the function shall be temporar-
ily on hold
remote Transmission
You are transmitting the signal to
control unit
In - range Indicator
Your are within the remote control
range.
door Open Warning
Doors are illegally opened (zone )
Trunk/Hood Trigger
Trunk or Hood is illegally opened
(zone )
Shock Sensor Trigger
Trigger on Shock Sensor (zone 4)
Warn Away Trigger
Trigger on Shock Sensor (zone )
Engine Starting
Your vehicle wngine starting by
remote control
Engine running
Your vehicle's engine is running
¿
Timer Control Start
Engine will start automatically at
the same time next day or every
/-hour.
Temperature monitor
Indoor temperature for your
vehicle
C3
Activate Channel 3
(Trunk Release).
C4
Activate Channel 4
C5
Activate Channel 5
C6
Activate Channel 6
Time monitor
Alert Alarm
You have set morning call alarm
Count down (parking) Timer
Reminder when time is up for
parking
Vibration mode
Remote Control vibrates when the
system is triggered
driver paging
Someone is paging you in front of
your vehicle
Low Battery
You have to replace the battery of
remote control.
C. PRoGRAmmING oF tHe LCD Remote tRANSmItteR:
Transmitter Button
Description
Operation
F
( second)
LCD screen lamp turns on for
5 seconds
Press and hold for second
melody sound to confirm enters
F
( seconds)
Timer Programming Mode
Press and hold for seconds -
melody sounds to confirm enter
F - F - F
Clear the Flashing Icon and
Melody Sound on the LCD
Screen Transmitter
Press within seconds
F -
(-second)
Melody / Vibration (
) Mode Press within seconds
F -
(-second)
Program Count Down (Parking)
Timer (0-Minute / 0M / 0
M /Hour /.5H / .0H)
Press within seconds to cycle
*leave the buttons starting count
down then
flashes
1. Screen Lamp ON:
Press and hold the
F
button one second, with one melody sound and the
LCD screen lamp will turns on for 5 seconds
2. Clear the Flash Icon and melody Sound:
Press the
F
button times within seconds will
clear the flash icon and melody sound on the LCD screen transceiver
3. Stop The Trigger melody Sound:
While triggering the alarm the LCD screen will alert user
through melody sound and flashing trigger icon, press any button on the LCD remote transmit-
ter to stop melody sound only.
4. Vibration / melody mode:
It is useful when you are in a noisy place and
difficult to hear beep sound from the remote control as the remote control in
this mode, vibrates itself if your security system is triggered.
Press the
F
button first, within seconds press and hold the button for
seconds to select the mode of vibration or melody, the
icon will displayed
on the LCD screen to show the LCD remote transceiver is on vibration mode.
5. Low Battery Indication:
When the power of the battery weakens, it has two short “beep”
sound and flash
icon while pressing the button of the LCD screen transceiver.
6. Set Up Fixed Count down (parking) Timer:
. Press the
F
button first, within seconds press and hold the
button for seconds, the
LCD screen will shows icon and timer (ie. 0:0) ,
