8
9
The noiseless feature is programmed to activate for one arming cycle only. The security system will
return to normal operation during the next arming cycle.
pASSIVE STArTEr dISABLES:
This security system is equipped with an optional Passive Starter
disable feature, the purpose of the feature is to protect the vehicle from being stolen at all times,
regardless of whether or not the alarm is armed.
The starter of the vehicle will be disable 60 seconds after the ignition is turned off. Once the key is
turned off, the LED will flash fast for 60 seconds.
After 60-second timer has elapsed, the LED will flash slowly (one-half its normal armed rate) to
indicate the passive starter disable is activated and the system will not respond to any trigger
input except the ignition trigger.
HIddEN ALArm FUNCTION:
Press the
button first; within seconds press the button to
activate the hidden alarm function. The security system will arm and with “Hidden Alarm Func-
tion”. The siren / horn will be silenced even if the sensor is triggered in the armed status.
H. PASSIVe ARmING
Active arming / disarming is controlling your security system via the remote transmitter. This secu-
rity system is equipped with an optional Passive Arming feature, which allows the security system
to arm 0 seconds after the last door is closed. Operation is as follows.
. Turn the ignition to the “OFF” position and exit the vehicle.
. After all entrances are closed, the security system LED will flash fast for 0 seconds. If you
reopen any door / hood / trunk, the security system LED will stop flashing. It will begin flashing
again once the vehicle all entrances are closed.
. After 0-second timer has elapsed, the security system will automatically “ARM”. The siren will
chirp [] time and the parking lights will flash [] time.
pASSIVE ArmINg WITH pASSIVE dOOr LOCKINg:
The vehicle doors will automatically lock
after passive arming cycle has been completed.
pASSIVE ArmINg BY-pASS:
While the system disarmed, Press the
button twice, the security
will respond with [] chirp and LED will turn “ON”. The security system will remain in this tempo-
rally state for as long as you wish. To exit passive by-pass, press the transmitter or button
and the system will return to normal status.
I. ACtIVe DISARmING - UNLoCK & DISARm:
. Press button on the transmitter.
. The horn will chirp twice and parking light will flash twice to indicating that the security sys-
tem is now disarmed. The vehicle doors will unlock and dome light will turn on for 0 seconds
upon disarming when interfaced with the security system.
System disarm doors Trigger
Trunk/Hood
Trigger
Shock Sensor
Trigger
Ignition Trigger
CLEAr THE FLASH ICON:
Press the
F
button times within seconds will clear the fash icon on
the LCD screen transceiver.
TAmpEr dISArmINg:
If alarm triggered, upon disarm the system, siren chirp 4 times, parking
light flash times.
pATHWAY ILLUmINATION
This feature turns the parking light “ON” for 0 seconds upon an
unlock signal and for 0 seconds upon the lock signal.
TWO STEp dOOr UNLOCK:
This feature will independently unlock the drives door only when
disarming the security system. Pushing the button on the transmitter a second time within
seconds will unlock the entire vehicle.
AUTOmATIC rE-Arm
(See Feature
“I - 2”
Programming): If this feature is selected, the security
system will automatically re-arm itself 60 seconds after disarming with remote transmitter.
Automatic rearm will cancel if any door is opened before the 60 seconds timer has elapsed.
J. DISARmING WItHoUt A tRANSmItteR
The Override function may be used if the remote transmitter is lost or inoperative.
. Enter the vehicle and turn the ignition switch to ‘ON’ position. (Alarm will sound.)
. Within 0 seconds push and release the valet switch
The alarm will stop sounding and enter the disarm mode. You can now start and operate the
vehicle normally.
