Aleratec 330106, Руководство пользователя

Страница: 27 / 44

www.aleratec.com 21
Using the USB Duplicator
Main Menu
6.1 Format FAT 16/32
This function is used to format flash drives with the duplicator. If the
original format is FAT 16/32, then the format operation will not change the
format, but will write over any data on the flash drive.
If the format is not FAT 16/32 (e.g. NTFS, Linux, or FAT multi-partition)
the controller will check the capacity of the flash drive. If the capacity is
greater than 2GB, it will automatically use FAT 32 format. If the capacity is
less than 2GB, it will use FAT 16.
Load the flash drives into the USB Duplicator. Use the 1. UP or DOWN
arrow to scroll through the menu until Utility is displayed on the LCD
screen.
Use the 2. UP and DOWN arrow keys to check the status of any of the
flash drives loaded in the machine. Drives inserted in the first port
(source) will not be formatted.
ESC
OK


USB Duplicator
6. Utility
ESC
OK


Do FORMAT
Confirm?
ESC
OK


[Utility]
1. Format FAT