www.aleratec.com
7
Using the USB Duplicator
Synchronous and Asynchronous
The 1:27 USB Copy Tower SA supports two copying methods:
Synchronous
•
Asynchronous
•
Synchronous Copying
Synchronous Copying means that all flash drives begin copying together.
Synchronous Copying is used when the source data is larger than the system
buffer (120MB).
You can check the size of the data source drive by inserting the source drive
into the USB Duplicator and using the arrow keys to first select “Information”,
then select “USB Info”.
Plug in one source and up to 27 target USB flash drives. The display will read
out the number of USB flash drives that are ready for copying and the content
size. When you have finished loading the target drives use the arrow keys to
select “Copy” and then select OK.
Asynchronous Copying
Asynchronous Copying is used when the data files are the same as or less than
the systems buffer memory (120MB). If the source data content is less than
the systems buffer memory you can copy flash drives continuously by taking
out the drive which has finished copying, and replacing it with another blank.
Asynchronous Copying will start immediately after loading the first target
drive.
When this process is used the source data is read into systems buffer first. You
can check the size of the data source USB flash drive by inserting it into the
USB Duplicator and using the arrow keys to first select “Information”, then
select “USB Info”.
Содержание 330106
Страница 1: ...USER GUIDE Aleratec 1 27 USB Copy Tower SA Part No 330106...
Страница 6: ...www aleratec com...