Aleratec 260174 Скачать руководство пользователя страница 68

Страница: 68 / 81

www.aleratec.com

Menu Overview

14.11 DVD+R High Compatibility Mode

This feature allows you to enable/disable the DVD+R High Compatibility

Mode feature by turning this feature

OFF

. The purpose of this

feature is to increase the compatibility of DVD+R media with a broader

range of DVD Video players. This process will increase the amount of

time required to duplicate your disc(s).

14.12 ISRC

This option allows you to enable/disable copying ISRC code of the

Audio CD. ISRC is the serial# of the audio tracks that uniquely identifies

the song in that audio track. This ISRC code is commonly found in

commercial Audio CD and rarely seen on the home made Audio CDs. By

enabling this feature, the duplication performance will be lowered.

14.13 Disable Drives

This feature allows you to disable certain drives/trays when those drives/

trays are producing high failure rates or not functioning properly.

14.14 USB Connection

This feature allows you to turn on/off the USB port on the back of

your duplicator. This option will allow a Writer on the duplicator to be

controlled by a PC. This feature will only be visible if the supported USB

Connection were installed.

*Please note that system will be restarted when this setting is changed.

14.15 Overburn (CDs Only)

This feature allows you to burn a few MB more than the standard capacity of the

target CD (e.g. 75 minutes of recording time vs. 74 minutes). The default setting

OFF

15. Utilities

15.1 Disc Info

This feature will identify your blank recordable Media’s format, capacity,

manufacture ID as well as the Media’s certified writing speed. This

function (Disc Info) can be found in the “Utility” menu.

Note:

This feature only applies to media in the recording trays.

Содержание 260174

















































































Результаты поиска

Содержание 260174

Отзывы:

Похожие инструкции для 260174

Бренды по названию

Популярные бренды

Aleratec 260174, Руководство пользователя

Результаты поиска

Содержание 260174

Отзывы:

Похожие инструкции для 260174

Бренды по названию

Популярные бренды