Aleko PYRAMID SQUARE, Руководство пользователя

Страница: 10 / 14

WARNING
The black silicone ring must be in place prior to
operating the heater.
5
AA
BB
CC
6
To aid in installation
place black silicone
ring on the middle
plate and then
install glass tube.
Ensure the rim of
the glass tube sits
firmly in the black
silicone ring.
BLACK SILICONE
RING
5. Assemble the reflector onto the flame 5
screen. Screw the 3pcs stud on the flame
screen, put 3 washers onto the top of stud,
then put the reflector onto the stud, secure
them with 3 washers and 3 wing nuts.
6. Carefully install the glass tube by lifting up
and inserting through the center hole in the
upper plate. Ensure the black silicone ring is
attached to the lower edge of the glass tube as
illustrated. Slide the glass tube through the hole
of the lower plate cover and onto the middle
plate. Check and ensure that the glass tube is
positioned properly and is completely covering
the center hole of the middle plate.
Hardware Used
Wing nut
Stud
x 3
x 3
Washer x 6
AA
CC
BB
Assembly Instructions