72
5.9.1.3 Display Hourly Rain, Rain Rate
While the
max values
are displayed as outlined in Section 5.9, press the
RAIN
button once to view the max hourly rain, twice to view the rain rate.
5.9.1.4 Display Absolute and Relative Pressure Min and Max Values
While the
max values
are displayed as outlined in Section 5.9, press and hold
the
RAIN/PRE
button for two seconds to enter pressure display, press
RAIN/PRE
button to switch between Relative pressure and Absolute
pressure.
While the
min values
are displayed as outlined in Section 5.9, press and hold
the
RAIN/PRE
button for two seconds to enter pressure display, press
RAIN/PRE
button to switch between Relative pressure and Absolute pressure
To return to normal mode, press the
LIGHT
button.
5.10 Resynchronize Wireless Sensor
While in outdoor TH/wind chill/dew point/heat index display mode press
TEMP+
button for 5 seconds, and the console will re-register the outdoor
sensor array
While in 1-8 channel Thermo-hygro sensor display mode press
TEMP+
button for 5 seconds, and the console will re-register the current channel
outdoor sensor.
While in Circle Mode press
TEMP+
button for 5 seconds, and the console
will re-register the sensor array and 1-8 channel sensors.
5.11 Backlight Operation
Press LIGHT button for 2s, will wake up Wi-Fi chip from
power saving state, the date display will turn to show
“
WAK
” , saying that at battery power supply state, the
Wi-Fi existed power saving mode, and it is very useful
when Live Data feature need to be activated on WS View app for live data
reference, as during Wi-Fi power saving mode, the system is not responding to
WS View app commands quickly.
5.11.1
With USB cable (included)
The backlight can only be continuously on when the console display is
powered on with the USB cable.
Press the LIGHT button to adjust the brightness between High, Middle, Low
and Off.
