56
6.5 POWER SUPPLY:
• Baby unit:
The baby unit can only be powered by the supplied power adapter.
The baby unit has no built-in battery for mobile use.
• Parent unit:
The parent unit is powered by the rechargeable 3.7V Lithium-Ion battery; this
battery can power the parent unit for 6 to 7 hours.
In the upper right corner of the display, you can check the battery status:
: battery if full
: battery is only 2/3 full
: battery is only 1/3 full, please charge
: battery is empty and the parent unit will switch off
: battery is charging
: battery full / no battery installed
The red indicator will start flashing on the display approximately 5 minutes
before the battery is completely empty. The unit also emits notification sounds.
Please immediately connect the adapter.
The battery can fully charge an empty battery in about 6 hours, regardless
whether the parent unit is switched on or off during this time.
6.6 INTERFERENCE-FREE:
• This baby display monitor is digitally coded. This means you will never receive
signals from other devices, nor can the signal from your baby unit(s) be recei-
ved by e.g. your neighbors.
• In case the baby unit(s) or parent unit is placed in or in the close vicinity of
electromagnetic fields, the signal (images or sound) can be slightly affected. If
this happens, try a different location for the baby unit(s) or parent unit or move,
if possible, the source of the interference.
6.7 RANGE:
•
The baby display monitor has a range of up to 300 meters in an open field and
up to 50 meters indoors; this range depends on local circumstances.
•
If the units get out of range from each other, the image will first ‘freeze’ for
several seconds (no movement), followed by ‘ ’ (no reception) and then the
display will turn black. The unit will also emit a warning tone every second.
6.8 EAVESDROPPING/WIRETAPPING:
• Eavesdropping/wiretapping of the signals from this baby video monitor is near-
ly impossible. Not only must one be within range of the baby video monitor,
one also needs some very costly equipment.
•
6.9 MAINTENANCE:
• Only clean the baby monitor with a moist cloth; never use chemical cleaners.
Before any cleaning, you must disconnect the adapters.
6.10 ENVIRONMENT AND DISCARDING:
• The packaging of this baby video monitor can be discarded as waste paper.
However, we advise you to save this packaging so you can adequately
protect the devices for transportation.
• Faulty or exhausted batteries must be delivered to your local collection
site for small chemical waste. Never discard batteries as normal
domestic waste.
• In case the baby video monitor is being replaced, please return it to your
supplier; they will guarantee environment-friendly processing.
6.11 IN CASE OF NO DISPLAY, NO SOUND:
– are the parent unit and baby unit switched off? (adapter connected, full
battery?)
– is the parent unit within range of the baby unit?
– is the baby unit switched off because no sound is being detected? (VOX)
– is the volume at the parent unit set to 0 (off)?
•
If the above is all in order, remove the adapters from the wall sockets, take the
rechargeable battery out of the parent unit, wait at least one minute and then
reconnect everything. Now, switch the parent unit and baby unit back on.
•
If you still receive no images or sound, please contact the customer service
of Alecto via the phone number 073 6411 355 (Netherlands), 03 238 5666
(Belgium), 0180 503 0085 (Germany) or via internet www.alecto.nl
7 DECLARATION OF CONFORMITY
The Alecto DVM-350 meets all essential requirements and provisions as descri-
bed in the European Directive 1999/5/EC.
The declaration of conformity is available on the website
www.alecto.nl
The use of this equipment is allowed in all countries in the EU. In France, Italy,
Russia and the Ukraine, only indoor use is allowed.
DVM-350-manual-NL-FR-D-GB-v1.0.indd 56
22-3-2016 15:01:56
