13W Engraver
AFTER SALES SUPPORT
(toll free)
MODEL No.: DC-11-1 • 07/2019 10283
e-mail: [email protected]
AUS
12
1300 889 028
AUS
Adjusting the depth of engraving (see fig. C)
The stroke adjustment dial (2) located on the side of the engraver
controls the stroke length and therefore the depth of engraving.
1) For a fine mark, turn the stroke adjustment dial (2) anti-clockwise to
position ‘1’.
2) For a deeper, thicker mark, turn the stroke adjustment dial (2)
clockwise to position ‘5’.
NOTE:
It is recommended that you practice on scrap material before
you start.
C
B
