ALDI WB 12-2, Руководство пользователя, Страница: 28 / 35

Noise and vibration information
28
Cordless drill
meister-service@meister-werkzeuge.de
AFTER SALES SUPPORT
GB IRE
GB IRE
00800 34 99 67 53
Noise and vibration information
The specified noise and vibration levels were determined in accordance with the
standards EN 60745-1, EN 60745-2-1 and EN 60745-2-2.
The declared vibration total value has been measured in accordance with a standard
test method and may be used for comparing one power tool with another.
The declared vibration total value may also be used to initially assess the impairment.
The declared values are noise emission values and therefore do not necessarily
represent safe values for the workplace at the same time. The correlation between
emission and imission levels cannot reliably provide for a conclusion as to whether
additional cautionary measures are necessary or not.
Factors that could affect the respective imission level present at the workplace involve
the specification of the work area, the surrounding area, the duration of exposure,
other noise sources etc.
You must also observe any divergences in national regulations with respect to
permissible workplace levels. The aforementioned information does, however, allow
the user to better assess dangers and risks.
CAUTION!
Risk of injury due to vibrations!
While actually using the power tool, the vibration total value may
differ from the specified value depending on how the power tool
is used.
− Define safety precautions to protect the user. The impairment
is assessed in consideration of actual conditions of use.
At the same time, all parts of the operating cycle must be
accounted for, i.e. including periods during which the power
tool is switched off and during which it is turned on, but not
operating under load.
CAUTION!
Hearing loss!
Exposure to noise may result in loss of hearing.
− Only work with suitable ear protection.
− Persons nearby must also wear suitable ear protection.