ALDI WB 12-2, Руководство пользователя, Страница: 12 / 35

Safety
12
Cordless drill
meister-service@meister-werkzeuge.de
AFTER SALES SUPPORT
GB IRE
GB IRE
00800 34 99 67 53
If you have your finger on the switch when carrying the power tool or
connect the device to the power supply when it is turned on, this may
cause an accident.
d)
Remove all adjusting tools or spanners before you switch the
power tool on.
A tool or spanner in contact with a rotating part of
the device may result in injury.
e)
Avoid an abnormal posture. Keep proper footing and balance at
all times. This will allow you to have better control of the power tool
in the event of unexpected situations.
f) Wear suitable clothing. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from the moving parts.
Loose clothing, jewellery or long hair may get caught in the moving
parts.
g) If the tool is provided for the connection of dust extraction and
collecting equipment, ensure these are connected and properly
used. Using a dust extractor may reduce risks associated with dust.
Using and handling the power tool
a) Do not overload the device. Use the right power tool for your
work. The right power tool will ensure that you work more effectively
and safely within the specified power range.
b)
Do not use a power tool if its switch is defective. A power tool that
can no longer be switched on or off is dangerous and must be repaired.
c) Pull the plug out of the socket and/or remove the rechargeable
battery before you make any adjustments to the device, change
the accessories or put away the device. This precaution will
prevent the power tool from accidentally starting.
d) Keep unused power tools out of the reach of children. Do not let
persons use the device if they are not familiar with it or have
not read these instructions. Power tools are dangerous if used by
inexperienced persons.
e) Maintain power tools with care. Check to make sure that the
moving parts are functioning properly and not stuck, whether
parts are broken or damaged so as to affect the function of the
power tool. Have damaged parts repaired before you use the
device. A large number of accidents are caused by poorly maintained
power tools.