ALDI WB 12-2, Руководство пользователя, Страница: 23 / 35

23
Cordless drill
meister-service@meister-werkzeuge.de
AFTER SALES SUPPORT
GB IRE
GB IRE
00800 34 99 67 53
Cleaning
12. If necessary, change the direction of rotation of the quick-action drill chuck with
the right-handed/left-handed rotation selector to remove the drill bit from the
bore hole.
13. Remove the drill bit or the magnetic bit holder and the bits (see chapter
“Removing tools”).
14. Push the battery release button and pull the rechargeable battery out of the
cordless drill.
15. Store the cordless drill and the accessories properly in the storage case 14 .
Removing a blockage
Follow the steps below to remove a blockage:
1. If the cordless drill engages a blockage, release the On/Off switch 8 and pull the
drill bit out of the drill hole.
2. Check whether the blockage is caused by the cordless drill by briefly pushing
the On/Off switch. Do not point the drill bit towards yourself or other persons and
animals.
• If it is not possible to start the cordless drill, follow the instructions in chapter
“Troubleshooting”, point 1.
• If the cordless drill is working properly, follow the next steps in this chapter.
3. When screwing, set the torque adjustment ring to a higher torque.
4. Push the On/Off switch all the way down and apply some pressure to the
cordless drill.
5. Take occasional breaks and take the drill bit out of the drill hole so that the drill bit
can cool off.
6. Repeat steps 4 to 5 until the blockage has been removed.
Cleaning
NOTICE!
Risk of damage!
Using unsuitable cleaners could damage the cordless drill and
accessories.
− Do not use any aggressive cleaners, brushes with metal or nylon
bristles, sharp or metallic cleaning utensils such as knives, hard
scrapers and the like.