Layout/Scope of delivery
HTW250/240P
10
AFTER SALES SUPPORT
00800 4003 4003
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
ter into the fuel tank opening. Make sure that the filter is seated in the lower corner
of the fuel tank (12). If necessary, use a long screwdriver to move the filter to its
correct position, taking care not to damage it in the process.
8.
Securely refit the fuel tank cap (10).
Changing the cutting blade (Fig. 10)
1. Hold the spindle in place with the allen key (26). Use the open end wrench (24) to
remove the flange nut, by turning in an anti-clockwise direction.
2.
Remove the flange nut, and cutting blade (8).
NOTE:
Ensure that all parts are clean of any dirt or grass prior to fitting.
3.
Fit the new cutting blade (8) over the inner flange.
4.
Fit the flange nut and tighten firmly using the open end wrench (23) supplied, in a
clockwise direction. Use the allen key (26) to stop the spindle rotating.
IX. TECHNICAL DATA
Engine
2-Stroke, 25.4 cm
3
Engine power
0.75 kW
Engine idling speed
3000±200 min
-1
Engine maximum speed
9000 min
-1
Cutting blade length
224 mm
Cutting depth
35 mm
Tank capacity
0.6 l
Mixing ratio (fuel / two-stroke oil)
40:1
Subject to technical changes!
AUS
Maintenance, cleaning and servicing/Technical data
LE2500P
22
AFTER SALES SUPPORT
1300 855 831
MODEL: LE2500P PRODUCT CODE: 61758 09/2018
