Layout/Scope of delivery
HTW250/240P
10
AFTER SALES SUPPORT
00800 4003 4003
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
VIII. MAINTENANCE, CLEANING AND SERVICING
Before each maintenance and cleaning work
1. Stop the engine.
2. Wait until the cutting device stops moving.
3. Pull off the spark plug cover (13).
m
WARNING!
Do not carry out maintenance work close to open flames. Risk of fire!
Maintenance and repair work other than those described in this chapter is only
allowed to be carried out by service staff.
For maintaining and cleaning, removed security devices must unconditionally
be mounted properly and proved again.
Use only original parts. Other parts can result in unexpected damages and injuries.
In order to avoid possible injuries wear gloves.
To guarantee a long and reliable usage of the machine carry out the following main-
tainance works regularly.
Check the machine for obvious defects such as
• loose fastening elements.
• worn or damaged components.
• deformed, broken or damaged cutting blade (8).
• leaks from the fuel tank cap or fuel lines.
Cleaning
• Keep the ventilation vents of the machine clean at all times, if possible, prevent foreign
matter from entering the vents.
•
After each use, blow air through the motor housing to ensure it is free from all dust
particles which may build up. Build up of dust particles may cause the unit to overheat
and fail.
• If the enclosure of the tool requires cleaning do not use solvents but a moist soft cloth
or soft brush only. Never let any liquid get inside the machine; never immerse any part
of the tool into a liquid.
AUS
Maintenance, cleaning and servicing
LE2500P
20
AFTER SALES SUPPORT
1300 855 831
MODEL: LE2500P PRODUCT CODE: 61758 09/2018
