19
AUS
Assembly and operation
m
WARNING!
Risk of injury!
The thread coil can be ejected.
Before using the device, please make sure that the thread coil (2) has been installed
correctly!
Operation
When working with the device, the protective device must be fitted to prevent objects
from being ejected. The integrated blade (A) in the protective device automatically cuts
the line to the optimum length (fig. 7.1).
Filling with fuel (fig. 8, 18)
m
WARNING!
Risk of injury!
Fuel is explosive!
-
Turn off and cool the motor down before filling the tank with fuel.
-
You must observe all safety instructions relating to handing fuel.
NOTE!
Product damage!
The device is supplied without motor or gearbox oil.
Before operating, you must fill it with fuel.
Never use oil for 4-cycle engine use or water-cooled 2-cycle engine. If can cause spark
plug fouling exhaust port blocking or piston ring sticking.
Mixed fuels, which have been left unused for a period of one month or more may clog the
carburettor or result in the engine failing to operate properly. Put remaining fuel into an
airtight container and keep it in the dark and cool room.
RECOMMENDED MIXING RATIO: petrol 40: oil 1
WARNING!
Take care of the emission of exhaust gases. Always shut off engine before fue-
ling. Never add fuel to a machine with a running or hot engine. Take care of fire!
WARNING!
Never smoke whilst refueling and avoid inhaling the fuel fumes.
WARNING!
Carefully open the tank top as pressure could have formed inside.
Before refueling:
-
Shake the fuel oil-fuel mixing bottle (16) well.
-
Place the machine on a flat stable surface, with the fuel tank cap facing upwards.
Clean the fuel tank cap and the surrounding area to avoid any dirt from entering the
tank during refilling.
-
Carefully open the fuel tank cap to allow the pressure inside to decrease gradually.
Use a funnel to refill and avoid filling the tank to the brim.
