Faults and repair
21
Faults and repair
Problem
Possible cause
Solution
Device does not
work
The rechargeable battery (not
included in the package
contents) is not charged.
Charge the rechargeable
battery.
The On/Off
switch
6
is not
functioning.
The switch (right-hand/
left-hand rotation)
5
is in
the middle position.
Set the switch to right-hand or
left-hand rotation.
The product will
not start.
The carbon brushes may be
worn out.
Contact a qualified workshop.
The drill bit does
not penetrate or
barely penetrates
the material to be
drilled into.
You are using an incorrect drill
unsuitable for the material to
be drilled into.
Select the right drill bit.
You want to drill into concrete
or masonry and the switch
(right-hand/left-hand
rotation)
5
is set to the
left-hand rotation.
Switch the drill to hammer
drilling and set the switch
(right-hand/left-hand rotation)
to right-hand rotation in order
to drill this material.
If faults and malfunctions are not listed here, contact the manufacturer’s After Sales
Support via the service address indicated on the warranty card.
Cleaning and maintenance
WARNING!
Risk of electric shock!
Do not immerse the product or let it come into contact with water or other
liquids. There is a risk of electrocution.
− Put the switch (right-hand/left-hand rotation) to the middle position to
prevent the product from switching on accidentally.
− Remove the rechargeable battery from the product.