First use
13
First use
Checking the product and package contents
1. Lift the product out of the packaging with both hands.
2. Place the product on a level, stable base, such as a workbench.
3. Check whether the product or the individual parts are damaged. If this is the case,
do not use the product. Contact the manufacturer via the service address indicated
on the warranty card.
4. Check to make sure that the delivery is complete (see
Fig. A on page 2
).
Using the SDS-Plus masonry drill
1. Make sure that the product is not moving, and lock the On/Off switch
6
by pushing
the switch (right-hand/left-hand rotation)
5
to the middle position (see
Fig. 1
).
5
6
1
2. Make sure that the quick-action drill chuck
2
is not in the SDS-Plus shank holder
3
.
The quick-action drill chuck must not be used for hammer drilling into stone, brick
or concrete.
3. If necessary, clean the shank of the masonry drill (not included in the product
contents) you’d like to use before using it and grease it lightly with drilling grease
(not included in the package contents).
4. Pull the locking mechanism of the SDS-Plus shank holder
4
on the product as far
back as possible and hold it in this position (see
Fig. 2
).
2
4
3