First use
18
CAUTION!
Risk of injury!
The drill bits, drill bit adapter and screwdriver bits have sharp edges and can
get hot during use, possibly causing injuries or burns.
− Wear protective gloves when clamping and unclamping accessories.
NOTICE!
Risk of damage!
Improper handling can damage the product.
− Make sure that the product has stopped moving before pressing the direction
of rotation switch in order to lock the On/Off switch.
− Make sure that the product has stopped moving before changing over the
setting from drilling to hammer drilling and vice versa.
− Use only accessories that are designed for this product and can be securely
clamped into place in the SDS-Plus shank holder or the quick-action drill
chuck.
Using the product
The quick-action drill chuck must not be used for hammer drilling into
stone, brick or concrete.
1. Insert the desired drill bit or drill bit adapter and screwdriver bit (not included in
the package contents) (see chapter ‘Operation’).
2. Select the desired mode (see ‘Setting the mode and direction of rotation’ chapter).
3. Select the desired direction of rotation (right-hand/left-hand rotation)
(see ‘Setting the mode and direction of rotation’ chapter).
4. If necessary, insert the rechargeable battery (not included in the package
contents) into the product’s battery holder
7
.
5. Slowly press the On/Off switch
6
.
The product starts slowly.
6. Increase the pressure on the On/Off switch to increase the speed. As soon as the
product is switched on, the LED work light
8
lights up the drilling site. The light
of this power tool is intended to light up the direct working area of the power tool
and is not suitable for lighting living areas.