ALDI 10093 Скачать руководство пользователя

Страница: 37 / 48

AFTER SALES SUPPORT

(toll free)

224cc 4 Stroke Petrol Lawn Mower

e-mail: [email protected]

1300 889 028

MODEL No.: SLM531 • 10/2020 • 10093

Maintenance

2. Remove the oil drain plug (18) bolt, (Fig. R1)

using a 10mm spanner (not supplied) in an anti-

clockwise direction to loosen. (Fig. R2)

WARNING: Oil may be hot.

3. Drain the oil into a suitable / approved container

for the disposal of oils and the like.

4. After the oil has drained, install and tighten the oil

drain plug (18) bolt. Wipe up any spilt oil.

5. To refill the oil tank, follow the process on page 26.

NOTE:

Please dispose of used engine oil in a manner

that is compatible with the environment. We suggest

you take it in a sealed container to your local service

station for reclamation. Do not throw it in the trash,

pour it into the earth, or pour down drains.

Air Cleaner Maintenance

The air cleaner system uses a pleated filter.

IMPORTANT A dirty air filter (35) will

restrict air flow to the carburettor.

To prevent carburettor malfunction, service the air

filter (35) regularly.

Check that the air filter (35) is clean and dry of dirt.
Filters thick with debris will not allow the engine

to breathe and result in difficult starting and poor

engine performance.
The air filter (35) should be checked after

approximately 25 hours of use, or annually.
1. Refer to Adjusting the Cutting Height section in

Preparing for Operation part on Page 28 to set

the height to the hightest level, in order to avoid

interference between the air filter cover (12) and

the bar (a) above the deck. (Fig. S1)

2. Open the air filter cover (12) by pushing in the rear

tab (right hand side) to release the clip, and then

Содержание 10093

















































Результаты поиска

Содержание 10093

Отзывы:

Похожие инструкции для 10093

Бренды по названию

Популярные бренды

ALDI 10093, Руководство пользователя

Результаты поиска

Содержание 10093

Отзывы:

Похожие инструкции для 10093

Бренды по названию

Популярные бренды