ALDI 10093 Скачать руководство пользователя | Manualshive

Страница: 29 / 48

background image

AFTER SALES SUPPORT

(toll free)

224cc 4 Stroke Petrol Lawn Mower

e-mail: [email protected]

1300 889 028

MODEL No.: SLM531 • 10/2020 • 10093

27

6. Again remove the oil filler cap/dipstick (19) and check the oil level. It should

be at the top of the full (H marking) indicator on the dipstick (19). (Fig. H3)

7. If low, add oil slowly into the engine oil fill. Do not overfill. After adding

oil, wait one minute and then recheck the oil level.

8. Re-position and tighten the oil filler cap/dipstick (19). Always ensure the oil

filler cap/dipstick (19) is firmly locked in place before the engine is started.

NOTE:

Do not allow engine to run low on oil as it will reduce the life of the

engine.

NOTE:

Do not over fill with oil above the full indicator mark.

Fuelling

IMPORTANT: Fuel goes off after about 3-4 months. If you find your

lawn mower does not start, first change the fuel in the tank (28)

with newly purchased fresh unleaded fuel. Do not use ethanol based fuels.

WARNING. Do not refill fuel tank (28) while engine is running or is

hot.

• Be careful not to admit dust, dirt, water or other foreign objects into

the fuel.

• Wipe off spilt fuel thoroughly before starting engine.

• Ensure you DO NOT fuel the lawn mower in close proximity to any

open flames, lit cigarettes, or hot objects.

1. Unscrew the fuel tank cap (27) and pour fresh unleaded fuel into the tank

(28) with the aid of a funnel. (Fig. I1-I3 )

2. Fill the tank (28) to approximately 2.5 cm below the lowest portion of the

neck to allow for fuel expansion. Be careful not to over fill or spill any fuel.

If this happens, wipe the spill with a clean rag.

3. Start the engine at least 3 metres away from the area where the fuel tank

(28) has been filled in order to avoid the risk of fire.

Preparing for Operation

I3

I1

I2

«
...
27
28
29
30
31
...
»

Содержание 10093

















































Отзывы:

Нет отзывов

Похожие инструкции для 10093

SABO 43-COMPACT E

Бренд: Sabo Страницы: 116

Бренд: Sabre Страницы: 191

Бренд: MK Martin Страницы: 30

Бренд: McConnel Страницы: 108

Бренд: Tar River Страницы: 56

Бренд: Oleo-Mac Страницы: 292

Бренд: Sabo Страницы: 100

Бренд: Ryobi Страницы: 340

Бренд: AL-KO Страницы: 304

Бренд: Poulan Pro Страницы: 29

Model Series 420

Бренд: Yard-Man Страницы: 16

Greensplex 160 898850

Бренд: Ransomes Страницы: 36

Бренд: Adano Страницы: 128

Бренд: Flymo Страницы: 2

Бренд: ARNETOLI MOTOR Страницы: 2

Бренд: Hitachi Страницы: 25

Бренд: Hitachi Страницы: 100

Бренд: Hitachi Страницы: 160

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды