15
Options Glossary
15
Dirty filters contact :
A dry contact, available at the
unit’s terminal board, closes when the
pressure drop accros a specific filter banks reaches its final pressure
drop
.
Blowres rotation detection:
Unit stops if rotation if the pressure increase in the supply air blower is null.
End switch on Dampers :
Unit start-up conditionnaly to the dampers openings
BacNet compatible Controler :
Unit is controlled using a BacNet compatible controller. The controller
can communicate with either a:
MS/TP connection or
IP connection
Remote Displays:
Offered with command buttons or with touch screen (Only available with the
BacNet controller).
Control Options
Tel. CAN.: 1-800-262-0916 USA.:1-800-255-7749
www.aldes.com
IMPORTANT
The following options may not be included with your device.
Consult the specifications form provided with your device for
more information
.
Low Temperature limit:
Unit will stop if supply air temperature is under set point ( adjustable)
for more than 5 minutes
Programmable Timer
Phase Loss Detection:
Unit will stop when a phase loss occurs, automatic restart (3-phase
power only)
Содержание InspirAIR Commercial Series
Страница 1: ...INSTALLATION AND OPERATION MANUAL InspirAIR Commercial Series ...
Страница 3: ...3 Table of Contents 3 Tel CAN 1 800 262 0916 USA 1 800 255 7749 www aldes com ...
Страница 23: ...Air balancing instructions With EC motor option and Distech controler For balancing put unit on high speed ...
Страница 24: ......