aldes InspirAIR Commercial Series, Инструкция по установке и эксплуатации

Страница: 12 / 24

12
Set-Up Sequence
12
L1
– L2 : ________________________________
L1
– L3 : ________________________________
L2
– L3 : ________________________________
L1
– G : _________________________________
L2
– G : _________________________________
L3
– G : _________________________________
A maximum deviation of
± 5% is acceptable
.
Measure the voltage of the main circuit breaker and note
the values(1 Phase or 3 Phases). Such Measurement shall
be made by a certified electrician in accordance with the
applicable electrical code.
Use the Electrical Wiring Diagram (supplied separatly) as a
reference to , close the
Start/stop and Occupancy control
Dry contact (optional).
3- Close the main disconect switch, the unit will start
DANGER
This device contains high-voltage electrical components. All
maintenance shall be done by a qualified technician to prevent
serious injuries and possible death. Installation shall be
completed in conformance with local building and safety codes.
Tel. CAN.: 1-800-262-0916 USA.:1-800-255-7749 www.aldes.com
DANGER
This device contains high-voltage electrical components. All
maintenance shall be done by a qualified technician to prevent
serious injuries and possible death. Installation shall be
completed in conformance with local building and safety codes.
WARNING: from this point on, the unit is no longer
e
lectrically safe.