9
August 31, 2018
ZONE STATUS LEDS
On a VP4X, each Zone Select pushbutton has a Green/Red indicator.
LED State
Description
All Cycling Colors
Factory Test Mode
All Blinking (Rapid)
Firmware Update Mode
Blinking Green
Zone Selected
All Sequential Blinking Green
Link Active
All Blinking Red
No Sync
–
No Q-Sys Core Detected
CONFIGURATION OF DIP SWITCHES
The configuration DIP switches are located on the side of the V-Page. Changing the states of these switches alter
the behavior of the V-Page. DIP switching may perform different functions during power up and during runtime.
Default position for all the switches for normal operation is OFF (UP if looking from the side of the unit).
V-Page can power up in one of the following modes (based on switches configuration):
- Normal Mode.
- Factory Test Mode.
- Firmware Update Mode.
During power up, the state of the switch (ON or OFF) determines the action.
During runtime, toggling the DIP switch (OFF => ON => OFF) will perform specified action. See the descriptions
below.
NOTE: Not all switches have a power up function associated with it.
NOTE: Not all switches have a runtime function associated with it.
