11
August 31, 2018
DIP SWITCH 3: FACTORY TEST MODE
POWER UP
–
FACTORY TEST MODE (FIRMWARE UPDATE DIP SWITCH 2 MUST BE OFF):
ON:
Used for Factory Testing purposes only.
OFF:
Default state of the switch for normal operation.
NOTE: Factory Test Mode is mainly used for troubleshooting. It is NOT a requirement to program the V-Page as
all the parameters can be programmed while operating in the normal mode.
NOTE: While in Test Mode, V-Page will not fully operate as a paging station.
DIP SWITCH 4: SPARE (NOT IN USE)
This DIP Switch is currently not in use.
POWER UP/RUNTIME:
ON:
Not in use.
OFF:
Default state of the switch for normal operation.
